Exergy analysis of the diesel pre-reforming solid oxide fuel cell system with anode off-gas recycling in the SchIBZ project. Part I: Modeling and validation

Solid oxide fuel cell (SOFC) systems with anode off-gas recirculation (AGR) and diesel pre-reforming are advantageous because they can operate with the current fuel infrastructure. In the SchIBZ-project, the prototype of such a SOFC system for maritime applications has already been commissioned. In this first paper, we model the system devices to conduct an exergy analysis of this real SOFC plant and validate them with experimental values from experiments in laboratory scale. The results of our simulation agree well with the experimental values. The calculations with the validated results may be closer to the real thermodynamic behavior of such system components than previous literature.     

基于CAN总线的多通道开度阀控制系统的设计

针对现有电动阀门控制系统可嵌入性差的问题，设计了一种基于CAN总线的网络化、多通道、开度型阀门嵌入式控制系统。其中，上位机主要用于下达各阀门开度等控制指令并同时监测其工作状态，而下位机采用双MCU架构，主MCU用于控制各阀门的开度大小，从MCU负责采集开度反馈电流以实现闭环控制。下位机采用了模糊PID算法进行控制参数的动态整定，可满足阀门在不同工况下的控制精度要求，并通过OLED屏显示各通道阀门的实际开度值。实验表明,该控制系统运行稳定，能实现对多通道开度阀的精准控制，控制精度在0.6%以内，并支持远程上位机控制和现地控制等多种工作模式。     

Measurement of chemical emission rates from cigarette butts into air

This study examined airborne emissions from cigarette butts for styrene, 2-methyl-2-cyclopenten-1-one, naphthalene, triacetin, and nicotine. Ten experiments were conducted by placing butts in a stainless steel chamber and measuring the chemical concentrations in chamber air. Emission rates were determined from the concentrations. Triacetin and nicotine concentrations were roughly 50% of initial concentrations after 100 hours, while concentrations of other chemicals decayed to less than 10% of initial concentrations within 24 hours. Initial emission rates per cigarette butt ranged from 200 to 3500 ng h⁻¹. Triacetin and nicotine emission rates at 25°C were 1.6 to 2.2 times higher than the rates at 20°C, while the emission rates of other chemicals at 25°C were 1.1 to 1.3 times higher than the rates at 20°C only during the first sampling period. The chemical concentrations and emission rates at 30°C were comparable or lower than the values at 25°C, possibly due to different batches of cigarettes used. The 24-hours emitted mass of nicotine from a cigarette butt at 25°C could be up to 14% of the literature reported nicotine masses emitted from a burning cigarette.     

近距离煤层群采空区漏风规律及防控措施研究

贵州地区煤层赋存条件复杂,煤层间距小,相邻采空区存在漏风通道的问题。采用SF6示踪法及重点区域指标气体数据分析法,对发耳煤矿采空区漏风规律及其治理措施进行研究。分析结果表明,由于相邻密闭效果欠佳,导致31004开切眼联络巷及31004工作面回风巷密闭漏风严重。31004采空区漏风通道主要是31004开切眼联络巷密闭及10^#煤层开采过程中对上部7^#煤层采空区造成二次扰动形成的纵向漏风通道;漏风量为83 m^3/min,采空区风速约为0.17 m/s。对存在的煤自燃隐患采取了注水降温措施,CO体积分数显著下降至(5~9)×10^-6。为即将开采的50105、50107工作面的煤自燃防控提供了科学依据和管控措施方案。     

Research on heat dissipation performance and flow characteristics of air‐cooled battery pack

With the depletion of fossil fuels and the aggravation of environmental pollution, the research and development speed of electric vehicles has been accelerating, and the thermal management of battery pack has become increasingly important. This paper selects the electric vehicle battery pack with natural air cooling as the study subject, conducts simulation analysis of the heat dissipation performance of battery packs with and without vents. Then this paper researches on the influence of internal flow field and external flow field. Field synergy principle is used to analyze the effect of velocity field and temperature field amplitude. The results show the following: it is found that the maximum temperature rise and the internal maximum temperature difference of the battery pack with vents are reduced by about 23.1% and 19.9%, raising speed value can improve the heat dissipation performance, and raising temperature value can decrease the heat dissipation performance. Reasonable design of the vents can make the inner and outer flow field work synergistically to achieve the best cooling effect. Then the reference basis for the air cooling heat dissipation performance analysis of electric vehicle, battery pack structure arrangement, and air‐inlet and air‐outlet pattern choosing are offered.     

Radon and moisture impacts from interventions integrated with housing energy retrofits

Energy retrofits can reduce air exchange, raising the concern of whether indoor radon and moisture levels could increase. This pre/post-intervention study explored whether simple radon interventions implemented in conjunction with energy retrofits can prevent increases in radon and moisture levels. Treatment homes (n = 98) were matched with control (no energy retrofits or radon intervention) homes (n = 12). Control homes were matched by geographic location and foundation type. t-tests were used to determine whether post-energy retrofit radon and moisture level changes in treatment homes significantly differed from those in control homes. The radon interventions succeeded in preventing statistically significant increases in first floor radon using arithmetic (p = 0.749) and geometric means (p = 0.120). In basements, arithmetic (p = 0.060) and geometric (p = 0.092) mean radon levels statistically significantly increased, consistent with previous studies which found that basement radon levels may increase even if first floor levels remain unchanged. Changes in infiltration were related to changes in radon (p = 0.057 in basements; p = 0.066 on first floors). Only 58% of the change in infiltration was due to air sealing, with the rest due to weather changes. There was no statistically significant association between air sealing itself and radon levels on the first floor (p = 0.664). Moisture levels also did not significantly increase.     

Economic Evaluation of Power System Flexibility by Commercial Air Conditioner Control with Large Penetration of Photovoltaic Generation

High penetration of intermittent renewable energy such as photovoltaic (PV) and wind power could cause shortage of power system flexibility. Demand response is expected to help supply ancillary service instead of the conventional power plant. Commercial air conditioners are a promising responsive load for demand response because they account for a large proportion of power consumption in the power system. We calculate a system operation cost and hourly operation pattern of each power plant by using the optimal power generation model considering flexibility supply from controlling commercial air conditioner. We obtained the following results as an effect of commercial air conditioner control. (1) The power generation of oil fired power plants decreases at peak time and annual fuel cost of oil fired plant is reduced by approximately 30% at most in Kanto area. (2) The percentage of rated operation mode of LNG combined cycle plants increases. (3) Curtailed energy rate of PV decreases because a power storage amount by pumped hydropower generation increases. (4) Required battery capacity to reduce PV curtailed amount decreased by combining battery energy storage system in case of high penetration of PV.     

井下安全阀力学性能分析

井下安全阀对安全性和可靠性要求较高。以渤海油田常用油管携带式井下安全阀为分析对象,对其工作压力、地面控制压力、全开启和全关闭压力、最大下入深度和自平衡能力等关键力学性能进行分析。井下安全阀的工作压力值与地面液控压力值相等,其选取依据为井口压力; 全开启和全关闭液控压力值可通过压力曲线法得到; 最大下入深度取决于弹簧安装时的预紧力; 自平衡能力与活塞面积和自平衡孔面积的比值有关,比值越大,自平衡能力越强。     

抽油井不压井作业装置及抽油泵底阀设计

江苏油田的部分油井存在油管短路、地层高压低渗、漏失严重等问题,这些问题造成压井作业困难,并且压井作业过程中的井控与环境污染风险较大。为了进行不压井检泵作业,同时缩短检泵之后的产量恢复周期,进行了不压井作业技术研究,并研制了不压井作业装置。为解决起下抽油杆过程中的防喷问题,改进了抽油泵底阀结构,该结构可实现起下抽油杆过程中油管不带压、无溢流,并保障起下油管过程中的井控安全。该技术在江苏油田现场应用9井次,效果良好。     

基于“校企协同”的制冷空调课程体系的构建

从制冷空调企业的现状出发,利用校企协同、产教融合的创新组织模式,整合暖通行业、企业和学校的资源优势,构建一套“协同创新”的制冷空调课程体系,从根本上提高建环专业学生工程素养和创新能力,以满足暖通行业、企事业单位对具有实践及创新能力的高素质应用型技术人才需求。